You are reading the article Fix Invalid Recovery Area Error On Windows Computer updated in September 2023 on the website Nhahang12h.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested October 2023 Fix Invalid Recovery Area Error On Windows Computer
If when you try to access the Windows Recovery Environment (WinRE) on your Windows 11/10 device, you encounter the error message Invalid Recovery Area on a blank screen, then this post will help you successfully resolve this issue.
The cause of this error is mainly that the recovery partition on your PC that houses the Windows RE is not intact, either because it has been deleted or just inaccessible due to some unknown reasons. Other reasons could be the following:
The WinRE is disabled in Windows settings.
The Boot Configuration Data Store (BCD) doesn’t contain entries to boot in recovery mode.
The file chúng tôi (WinRE environment image) is missing or moved.
The WinRE configuration file chúng tôi is missing or contains incorrect settings.
Fix Invalid Recovery Area error on Windows PCIf you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
Enable Windows RE
Check BCD Entries for WinRE
Reset WinRE settings in chúng tôi file
Find and copy the chúng tôi file manually
Perform Windows 10 In-Place Upgrade Repair
Let’s take a look at the description of the process involved concerning each of the listed solutions.
1] Enable Windows REIf the Windows recovery environment is disabled, you’ll encounter the error. In this case, you can enable Windows RE. Here’s how:
First you need to check the status of WinRE.
Press Windows key + R to invoke the Run dialog.
In the Run dialog box, type cmd and then press CTRL + SHIFT + ENTER to open Command Prompt in admin/elevated mode.
In the command prompt window, type the command below and hit Enter.
reagent /infoIf the Windows RE status shows Disabled, input the command below and hit Enter to turn on the WinRE.
reagentc /enableAfter enabling this option, and you still could not access the Recovery environment in Windows 10, try the next solution.
2] Check BCD Entries for WinREWindows Boot Loader determines if it has to load Windows RE. It is possible that the loader is pointing to an incorrect location.
Open PowerShell with admin privileges, and execute this command:
bcdedit /enum allIn that section, find “recoverysequence” and note the GUID.
Again, in the result, search for Windows Boot Loader identifier set as the noted GUID.
Make sure that the device and osdevice items show the path for the chúng tôi file and they are the same. If not, we will have to point the current identifier to one which has the same.
Once you find the new GUID, run the command:
bcdedit /set {current} recoverysequence {GUID_which_has_same_path_of_device_and_device}See if this resolves the issue.
3] Reset WinRE settings in chúng tôi fileOn Windows 10, just delete the chúng tôi file and it will be automatically created the next time you enable WinRE.
The chúng tôi file should be located in the dirctory path below – assuming C is the drive housing the Windows 10 installation.
C:RecoveryWindowsRENote: You may need to show hidden files and folders to find and delete the file.
4] Find and copy the chúng tôi file manuallyDo the following:
Open Command Prompt in admin mode.
In the CMD prompt window, type the command below and hit Enter.
dir /a /s c:winre.wimIf you have found the file, copy it into a default location by running the commands below one after the other:
attrib -h -s c:Recovery3b09be7c-2b1f-11e0-b06a-be7a471d71d6winre.wim xcopy /h c:Recovery3b09be7c-2b1f-11e0-b06a-be7a471d71d6winre.wim c:WindowsSystem32RecoveryIf you couldn’t find the file on your local drive, you can copy it from a similar Windows 10 installation instance(the OS version and the system architecture must match), or from the install media/bootable USB flash drive.
To do it, open the sourcesinstall.wim (or chúng tôi on the DVD/ ISO image using 7-Zip and extract the WindowsSystem32RecoveryWinre.wim and chúng tôi to the C:WindowsSystem32Recovery folder.
The original chúng tôi file must be copied from the WindowsBootDVD folder.
Once you have copied a healthy chúng tôi file, try accessing the recovery environment and if the issue persists, try the next solution.
5] Perform Windows 10 In-Place Upgrade RepairThis solution requires you to perform a Windows 10 in-place upgrade repair. A repair upgrade is a process of installing Windows 10 over the existing installation of Windows 10 on your hard disk, using your installation DVD or ISO file.
Performing this can repair broken operating system files while preserving your personal files, settings, and installed applications.
Hope this helps!
You're reading Fix Invalid Recovery Area Error On Windows Computer
Update the detailed information about Fix Invalid Recovery Area Error On Windows Computer on the Nhahang12h.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!