Cập nhật thông tin chi tiết về Zk-Pp2K Pwm Dc 3.3-30V 12V 24V Motor Speed Controller Regulator 8A 150W Adjustable Led Dimmer Pulse Duty Ratio mới nhất trên website Nhahang12h.com. Hy vọng nội dung bài viết sẽ đáp ứng được nhu cầu của bạn, chúng tôi sẽ thường xuyên cập nhật mới nội dung để bạn nhận được thông tin nhanh chóng và chính xác nhất.
Practical Scenes: 1. LED brightness adjustment, frequency, duty cycle can be adjusted 2. Motor speed adjustment, frequency and duty cycle can be adjusted 3. Drive the solenoid valve to pull and release, automatic cycle, delay output, cycle number (or infinite loop) can be set. 4. Control equipment to turn on and off, do switch fatigue test, voltage sag and other tests to verify the reliability of customer equipment. 5. Delay start load, delay time can be set, after the delay, it will be turned on or intermittently. Features: 1.1 can directly drive LED, motor, solenoid valve and other loads 1.2 Two modes can be selected: PWM mode – frequency (continuous), duty cycle. Note that the number of pulses cannot be set in this mode, and the pulse is always emitted. PULSE pulse mode – positive pulse width time, negative pulse width time, power-on delay start time, and number of pulses are adjustable. 1.3 With start and stop button, can control the output and stop of the signal 1.4 Wide voltage input 3.3-30V, 5.08mm terminal wiring Specifications: Working voltage: 3.3~30V (note that the positive and negative poles Should not be reversed, otherwise it may burn out) Frequency range: 1Hz~150KHz, the accuracy is about 2%. Motor speed control generally chooses 20KHZ Duty cycle range: 0-100%, 1% stepping Number of pulses: 1-9999, or infinite (display '—-' stands for infinity) Delay output time: 0.000s-9999s, the minimum can be set 1ms Positive and negative pulse width length: 0.000s-9999s, the minimum can be set 1ms Output load capacity: less than 8A (MOS switch tube) Output amplitude: The amplitude is equal to the supply voltage (OUT+ is directly connected to the V+ module) Product size: 79mm*43mm*30mm Product Weight: 42g Packing: Anti-static bag Module description: Button operation instructions: PWM Mode (display has "%" for PWM mode) 1. The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays "OUT" mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%. 2. If you want to switch to PULSE mode, long press the SET button (more than 6 seconds), do not release, you will see the screen change, "%" disappears, it is PULSE mode. PULSE Mode (No "%" on the right side of the display is PULSE mode) 1. The line above the LCD screen displays the positive pulse width time. The P+ and P- buttons set the parameter. The line below the LCD screen displays the negative pulse width time. The N+ and N- buttons set the parameter. Press the STOP button to control the signal output or stop. When the output is stopped, the output is 0. The screen displays "OUT" for output, otherwise it stops output; the default factory positive pulse width is 0.5 seconds and the negative pulse width is 0.5 seconds. 2. Pulse number and delay time setting – In PULSE mode, press and hold the SET button for 2 seconds and then release, enter the pulse number and delay time setting interface, the screen displays SET, it will be turned off and cleared after entering. ;P+ and P- buttons set the delay time, N+ and N- buttons set the number of pulses, the factory default delay time is 0 seconds, the number of pulses is infinite (display —-); then press SET button 2 In seconds, it will automatically return to the pulse interface, press the STOP button, after the delay setting time, start to issue the set number of pulses. If the number of pulses is sent, it will automatically output 0. If the period is not sent, pressing the STOP button will turn off. The output pulse is turned off and cleared, and the set number of pulses is issued each time it is started. Application Operation Examples: 1. PWM output 20KHZ, 60% duty cycle: Select PWM mode, the frequency is set to 20.00, and the duty ratio is set to 060%. 2. The output is turned on for 0.6 seconds and turned off for 0.2 seconds. Infinite loop: select PULSE mode, the positive pulse width is set to 0.600, the negative pulse width is set to 0.200, the delay time is set to 0.000, and the number of pulses is set to — -. 3. Power on or press the start button, delay 5 seconds, then the output is turned on for 0.6 seconds, off 0.2 seconds, infinite loop: select PULSE mode, positive pulse width is set to 0.600, negative pulse width is set to 0.200, delay The time is set to 5.000 and the number of pulses is set to —-. 4. Power on or press the start button, delay 5 seconds, then output high level 10ms low level 10ms pulse 100: select PULSE mode, positive pulse width is set to 0.010, negative pulse width is set to 0.010, delay The time is set to 5.000 and the number of pulses is set to 0100. 5. Power-on delay for 10 seconds, then permanently output signal: select PULSE mode, the positive pulse width is set to a number greater than 0, the negative pulse width is set to 0, the delay time is set to 10.00 seconds, and the pulse number is infinite. (—-). 6.Other applications can explore or consult customer service All setup parameters are not lost when they are turned off. Note: The high-power PWM driver (PP2 and PP2K type) is a MOS switch type output. When the load is not connected, there is no waveform, and the waveform is only after the load is connected. Package Included: 1 x ZK-PP2K PWM DC 3.3-30V 12V 24V Motor Speed Controller Regulator
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng)…..
Waterproof Pwm Dc Motor Speed Governor High Power Dc Controller 12V 24V 36V 48V 20A
Specifications: Model: CCM96SK Potentiometer: resistance value B100K; opening 8mm; Input voltage: DC10-60V output voltage is about 0-100% of the input voltage Control power: 12V*10A=120W, 24V*10A=240W Rated current: 10A Maximum current: 20A Speed range: 5%-100% Size: 88mm*59mm*35mm PWM frequency: 25KHz Weight: 94g Precautions and Instructions: 1. The DC motor governor input is DC, and it can't be directly connected to AC (such as: household 220V AC), otherwise it will burn out. 2. The positive and negative poles of the DC power supply cannot be reversed, otherwise the governor will be damaged. 3. The motor can be positive or negative, when the running direction is inconsistent with the expectation. The direction can be changed by the line adjustment sequence. 4. The potentiometer knob can change the governor output duty cycle to change the motor speed. Package Included: 1 x Waterproof PWM DC Motor Speed Governor DC Controller
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng)…..
Wall Mounted Led Light Switch Touch Controlled Rgb Led Dimmer Controller For Dc12V/24V Single Color Led Light Strip
Thương hiệu OEM Xuất xứ thương hiệu China Xuất xứ china
Package Includes:
1 Piece LED Dimmer1 Piece Manual
Note:
Since the size above is measured by hand, the size of the actual item could be slightly different from the size above.Due to the lighting effects, monitor settings, etc. There could be some slight difference in the color tone of the pictures and the actual item.
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng)…..
Xy-Pwm Dc3.3-30V 1Hz~150Khz Digital Display Square Wave Rectangular Wave Pulse Signal Generator
contact us Function: 1. Protective Shell 2. LCD High Definition Display 3. Support UART 4. Supporting frequency adjustment 5. Support duty cycle adjustment 6. High accuracy detection 7. Supporting power-off memory function 8. 0.1 Channel PWM Output 9. Purpose: Device used as a signal source or excitation source in production practice Feature: Working voltage: 3.3-30V Frequency range: 1Hz~150KHz Frequency accuracy: the accuracy in each range is about 2% Signal load capacity: output current can be around 5~30ma Output amplitude: PWM amplitude is equal to supply voltage Ambient temperature: -20~70°C Material: Plastics Size: 79*43*27mm/3.11*1.69*1.06" Notes: 1. Due to the different monitor and effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow smeasuring deviation due to manual measurement. Package includes: 1 x Digital pwm signal generator
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng)…..
Bạn đang xem bài viết Zk-Pp2K Pwm Dc 3.3-30V 12V 24V Motor Speed Controller Regulator 8A 150W Adjustable Led Dimmer Pulse Duty Ratio trên website Nhahang12h.com. Hy vọng những thông tin mà chúng tôi đã chia sẻ là hữu ích với bạn. Nếu nội dung hay, ý nghĩa bạn hãy chia sẻ với bạn bè của mình và luôn theo dõi, ủng hộ chúng tôi để cập nhật những thông tin mới nhất. Chúc bạn một ngày tốt lành!